Masterwork Bend ConcreteMasterwork Bend Concrete

Concrete Contractor in Deschutes River Woods - Slabs Built on a Packed Base

Masterwork Bend Concrete is a concrete contractor based in Bend, OR. We pour driveways, patios, garage floors, steps, footings and foundations for homes and small businesses in Deschutes River Woods, right next door.

New concrete patio with a brushed finish beside a house, furnished with a picnic table, chairs and a kettle grill.

Deschutes River Woods sits right off Bend's southwest edge

Deschutes River Woods sits against Bend's southwest edge, with the Deschutes River along its northwest side and Newberry National Volcanic Monument along the south. It's unincorporated, so there's no city government out here and Deschutes County handles the permits. The work feels a lot like our jobs in Bend, just with more room. We see houses on bigger, wooded lots, long driveways that are often still gravel, and plenty of shops and outbuildings that need a slab.

We pour the same way here as we do in Redmond, but the ground can go from rock to loose soil inside one yard. That's what moves the price most, along with the finish you pick, while weather and any permit set the schedule, so the estimate is where you get your own figure. It's also why we dig out and pack the subgrade, the dirt a slab sits on, before anything else.

What winters, heat and trees here do to concrete

Deschutes River Woods is high desert under pines, and most of the concrete problems we get called about out here trace back to cold, heat, roots or water.

  • Winters here bring snow and hard freezes, and water that gets under a slab swells as it freezes and can lift it.

  • Summer afternoons run hot and dry, and concrete poured in midday heat can end up with a weak, dusty top, so we pour early.

  • Many lots are wooded, and roots growing under an old driveway or patio are a common reason it cracked or heaved.

  • Snowmelt has to go somewhere, and a slab that tips toward the house sends it at your foundation, so we check drainage first.

Those are the things I check first when I come out to your place, before any number goes on the estimate.

Serving Deschutes River Woods from Bend

We're based in Bend and work in Bend and the cities around it, and Deschutes River Woods is one of the closest. Our crew also pours in Redmond and Crooked River Ranch, among other places.

Concrete work we do in Deschutes River Woods

Get a free on-site estimate in Deschutes River Woods

Send the form or call (458) 256-4015, and we'll reply within one business day to set a time. I'll come out to your place in Deschutes River Woods, look at the ground and write your estimate on site, free and with no obligation.

Hours
Mon–Sun: 6 AM–11 PM

Choosing a concrete contractor for Deschutes River Woods

I started Masterwork Bend Concrete in 2017 after learning the trade on crews around Bend. Here's how a job in Deschutes River Woods runs with us, and why it's built the way it is.

  • I write the estimate myself

    I come out to look at your job and write the estimate, and I'm on site running it while our crew does the work. The person who priced your slab is the one watching it go in.

  • Base first, finish second

    If the budget gets tight, I'd cut a fancy finish before I'd cut base work. Nobody sees a dug-out, packed base on pour day, but it's what keeps your slab from sinking with the dirt.

  • Licensed, insured, site left clean

    We're fully licensed and insured, and I want your site cleaned up before we leave. Your satisfaction, guaranteed. To set up a visit, call (458) 256-4015 or use the form.

Concrete questions from Deschutes River Woods homeowners

Do I need a permit for concrete work in Deschutes River Woods?

Permits here come from Deschutes County, not the City of Bend, and whether your job needs one turns on what you're building. The county's Planning Division issues land use permits for things like a new house or a detached shop or garage, and its Building Safety Division issues building permits. Under state rules, whoever does the work, you or your contractor, is responsible for getting them. I check at the estimate whether yours needs one, and if it does, we either pull it ourselves or tell you plainly who has to before anything goes on the calendar.

Does a concrete contractor need a license in Oregon?

Yes, Oregon law generally requires anyone paid to do construction work that improves real property to hold a state construction contractors license. The Construction Contractors Board investigates work done without one. Deschutes County doesn't require a business license for most businesses in unincorporated areas like this one, so the state license is the one that counts, and it's worth asking any contractor you're weighing about it.

Does the fire hardening code apply to a new shed in Deschutes River Woods?

A new shed falls under the county's fire hardening rules unless it's a detached building nobody lives in, under 400 square feet, with a roof no more than 15 feet high. The rules now apply to all new homes and new accessory structures in unincorporated Deschutes County, while repairs, remodels and additions are exempt. If we're pouring the slab for a building the rules cover, tell me at the estimate so the slab and the building plans line up.

How much does a new concrete driveway cost in Deschutes River Woods?

Your price comes from the size of the slab, how much digging and base your ground needs, whether old gravel or asphalt has to come out, how close the truck can get and the finish you choose. Long driveways and rocky spots push it up, and a plain broom finish costs less than stamped or colored concrete. I put your own number in writing after I've walked the site.

How long does new concrete need to cure before I can drive on it?

You can usually walk on new concrete after a day or so and drive a car on it after about a week, longer when nights turn cold. Curing, the slow hardening that keeps going after the pour, drags in cold weather, so on fall pours here we cover the slab at night to hold in warmth.

What causes new concrete to crack in Deschutes River Woods?

Most bad cracks come from a base that was raked level instead of dug out and packed, water freezing under the slab, or control joints cut late or skipped. Concrete usually cracks a little somewhere, so we cut control joints, shallow grooves that give a crack a straight place to form, on time. Where the job calls for it we set rebar, steel bars inside the slab that hold the pieces together if it does crack.

Plan your Deschutes River Woods concrete project

We answer (458) 256-4015 from 6 AM to 11 PM, seven days a week, so you can call after work or send the form whenever it suits you.

Mon–Sun: 6 AM–11 PM

(458) 256-4015Request an estimate